Current Inventory > Liquid Chromatography

Stock Number: JMS-LC0003
Manufacturer: Agilent
Model: 1100 Series HPLC Binary - ALS - Colcom - DAD- Degasser
Price: Inquire


  • Solvent Tray
  • G1312A 1100 Series Binary Pump
  • G1322A 1100 Series Solvent Degasser
  • G1329A 1100 Series Autosampler
  • G1330A Autosampler Chiller
  • G1316A Column Compartment
  • G1315A Diode Array Detector
  • Computer with Chemstation Software
  • Power Cords & Manuals




Submit Inquiry - fields marked with * are required


    security code
Enter Security Code:



Agilent 1100 Series G1312A Binary Pump Overview
The Agilent G1312A Binary Pump has 4 solvent inlets and built in gradient control.
It also can be remotely controlled by an external G1323 controller. Setable flow range:Setpoints 0.001 – 5 ml/min, in 0.001 ml/min increments

, with a flow range of 0.1 – 5.0 ml/min
. Delay volume 180 - 480 uL without mixer, 600 - 900 uL with mixer.

Agilent 1100 Series G1322A Solvent Degasser Overview:
The Agilent G1322A Degasser includes 4 micro structured membranes, and a vacuum pump. Low internal volume (1 mL per channel) for fast and easy flushing, purging, priming, and solvent exchange. High degassing efficiency for the most demanding applications for highly reproducible analyses. The G1322A vacuum degasser is built with four solvent channels. 

  • Flow rate 0-10 ml / min, reduced performance above 5ml / min
  • Internal volume 1ml per channel
  • Solvent pH ranbe 1-14ml should not contain acids which attack stainless steel.
Agilent 1100 Series G1316A Thermostated Column Compartment Overview:
The Agilent 1100 Series G1316A thermostatted column comparment is built with two heat exchangers for solvent pre-heating, automated column identification module and CAN cable.
  • Temperature Range 10° below ambient to 80° C
  • Temperature Stability ± 0.15°C
  • Temperature Accuracy ± 0.8°C
  • Column Capacity Three 30cm columns
  • Warm-up/Cool Down 5 mins from ambient to 40°C
  • Differant Types Communication Ports CAN, GPIB, RS-232C, APG Remote
Agilent 1100 Series G1315B Diode Array Detector Overview:
The Agilent G1315B Diode Array Detector is designed for the maximum optical performance.  Flexible slit setting from fine bands to highest sensitivity, with settings of 1 nm the fine structure of benzene can be revealed - even at 0.7mAUFS.  A broad slit of 8 or 16nm can be chosen to minimize baseline noise thus enhancing sensitivity.  
  • Wavelength range 190-950 nm
  • Light source Deuterium and tungsten lamps
  • Detection type 1024 - element photodiode array
  • Short term noise (ASTM) single & mult-wavelength ± 1° x 10-5 AU at 254 and 750 nm
  • Drift 2° x 10-3 AU / hr at 254 nm
  • Linear absorbance range > 2 AU (upper limit)
  • Wavelength accuracy ± 1 nm
  • Wavelength bunching 1 - 400 nm
  • Diode width < 1 nm
  • Analog outputs Recorder / integrator: 10 mV or 1 V, output range  0.001 - 2 AU, two outputs

Agilent 1100 Series G1329A ALS Autosampler is a variable volume auto sampler with a sample capacity of 100 samples. Variable volume injections from 1 to 100uL are programmable and temperature controlled. Temperature ranges from 4-40°C with a temperature accuracy of -1 to +5°C.